3D Printing Materials Technical Specifications

Below you will find information concerning the technical properties, food assessment, factory certification and regulatory information of each of materials we use for your 3D prints. For more information on 3D printing materials used, including the design guidelines and size restrictions, click on the material or go directly to the design guidelines.


On this page you will find all of the technical specifications on materials we use for 3D printing arranged by:


Materials Specifications Sum Up

For complete information on any of the materials, click on the material of interest in the header row.


Properties Plastic Multicolor Opaque Resin Translucent Resin Alumide MDLS Steel Binder Jetting Steel SLM Aluminuim Titanium DMLS Silver Casting

3D Print Density (g/cm3)

0.90 - 0.95 N/A 1.17 - 1.18 1.18 - 1.19 1.35 ± 0.05 7.9 ± 0.1 7.86 2.7 4.7 ± 0.09 N/A

Tensile Modulus (N/mm2)

1700 ± 150 6405 N/A 2000 - 3000 3600 ± 150 185000 ± 5% 150000 ± 1000 N/A N/AN/A

Tensile strength (N/mm2<)

45 ± 3 9 50 - 65 50 - 65 45 ± 3 470 - 530 450 140 N/A N/A

Elongation at break (%)

20 ± 5 0.25 10 - 25 10 - 25 3 ± 0.5 40-50 5 12 13 N/A

Melting point/glass transition(°C)

172 - 180 112 N/A N/A 172 - 180 1400 N/A 1259 1660 N/A

Max size (mm x mm x mm)

675 x 545 x 366 381 x 254 x 203 254 x 251 x 203 254 x 251 x 203 315 x 240 x 190 250 x 220 x 220 737 x 381 x 362 320 x 270 x 220 250 x 220 x 220 100 x 80 x 60

Min size (mm x mm x mm)

0.8 x 0.8 x 0.8 2 x 2 x 2 N/A N/A N/A N/A N/A N/A N/A 2.4 x 2.4 x 0.8

Composition of our silver material

Pure silver: 92.5%
Metal Alloy: 7.5%


Composition of our brass material

Copper : 82%
Zinc : 18%



Technical Specification Sheets

Here you will find downloadable information on materials we use for 3d printing. This includes technical datasheets, food safety and regulatory information.


Material Technical specification sheets
Plastic

Flexible Plastic

Multicolor

Resin

Alumide

Ceramic









×